VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
- 9. Steering
   9.2. Safety cushion
   9.3. Steering wheel
   9.4. Cross steering draft
   9.5. Installation of the pump of the amplifier of steering
   9.6. Angles of installation of forward wheels
   9.7. Main malfunctions of a suspension bracket and steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment







9.2. Safety cushion

GENERAL INFORMATION

Unblocking of a steering column

 

Release of a safety cushion on a steering wheel with three spokes

1 – steering wheel,
3 – the fixing clip,
10 – clamp

Release of a safety cushion on a steering wheel with four spokes

1 – steering wheel,
3 – the fixing clip,
10 – clamp

Removal

PERFORMANCE ORDER
1. Switch off ignition and remove a weight wire from the accumulator.
2. Isolate a weight wire to avoid casual connection it to the accumulator.
3. Establish forward wheels of the car for the movement directly forward. At the same time the steering wheel has to be established in average situation.
4. Turn a steering wheel on 90 ° counterclockwise.
5. Unblock a steering column, see rice. Unblocking of a steering column.
6. Move a steering wheel against the stop on yourself and down.
7. Record the provision of a steering wheel.
8. Release a safety cushion for what from a reverse side of a steering wheel insert an edge of the screw-driver 175 mm long into an opening of a steering wheel, see rice. Release of a safety cushion on a steering wheel with three spokes and rice. Release of a safety cushion on a steering wheel with four spokes.
9. Moving the screw-driver handle up, an edge of the screw-driver press a clamp 10 down and release the fixing clip 3 safety cushions. Move a safety cushion from a steering wheel.
10. Turn a steering wheel on 180 ° clockwise and similarly release a safety cushion from the second fixing clip.
11. Establish a steering wheel in average situation. At the same time wheels will be established for the rectilinear movement.
12. Disconnect the one-contact electric socket of a safety cushion.
13. Remove a safety cushion.
Prevention

Do not change the provision of a steering wheel.



Installation

PERFORMANCE ORDER
1. Move a safety cushion to a steering wheel and connect the one-contact socket of a safety cushion.
2. Establish a safety cushion on a steering wheel so that the fixing clips were established opposite to openings. Being careful, press a safety cushion before its accurate fixing.
3. Connect a weight wire to the accumulator, at the same time in interior of the car there should not be people.