VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
- 7. Transmission
   + 7.1.2. Clutch plate
   + 7.2. Mechanical transmission
   - 7.3. Automatic transmissions
      7.3.1.2. Adjustment of the mechanism of gear shifting
      7.3.2. Completely automatic transmission
      7.3.2.1. Adjustment of a cable of switching (automatic transmission)
      7.3.2.2. All-wheel drive cars
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






7.3.2.1. Adjustment of a cable of switching (automatic transmission)

GENERAL INFORMATION

Cable of control of the automatic transmission

1 – spherical fastening of a cable,
2 – lever of the choice of transfers,
3 – bolt, 25 Nanometers,
4 – nut of fastening of a cable, 10 Nanometers

Check

PERFORMANCE ORDER
1. Lift the car and fix it on supports or install it over a viewing hole.
2. Install the selector lever in situation P, see rice. Cable of control of the automatic transmission.
3. On the transmission, having pulled up, remove a spherical tip of a cable of control of the transmission from the lever of the choice of transfers.
4. Move the selector lever from situation P to situation 1. At the same time the lever of the selector has to move easily and smoothly. Otherwise replace a cable of control of the transmission.
5. Move the selector lever to situation P. At the same time the lever of the choice of transfers on the transmission has to be in the lowermost situation. Check combination of a spherical tip of a cable of control of the transmission with the lever of the choice of transfers on the transmission. If combination is absent, it is necessary to adjust a cable of control of the transmission.

Adjustment

PERFORMANCE ORDER
1. Move the selector lever to situation P.
2. Move the lever of the choice of transfers on the transmission to the lowermost situation. At the same time the ratchet of the parking has to be latched.
3. Weaken a bolt of fastening of a support of a cable of control of the transmission. Moving a support, establish it in such situation when the tip of a cable is combined with the lever of the choice of transfers on the transmission. In this situation tighten the bolt (3) fixing transmission support the moment of 25 Nanometers see rice. Cable of control of the automatic transmission).
4. Carry out a control trip and check operation of the lever of the selector. Start of the engine is possible only in provisions P and N of the lever of the selector.
5. Include ignition. On the car which is standing still the lever of the selector can be moved only from provisions P and N by simultaneous pressing of a pedal of an accelerator.