VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
- 7. Transmission
   - 7.1.2. Clutch plate
      7.1.3. Removal of air from the hydraulic drive of coupling
      7.1.4. Main malfunctions of coupling
   + 7.2. Mechanical transmission
   + 7.3. Automatic transmissions
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






7.1.4. Main malfunctions of coupling

GENERAL INFORMATION

MALFUNCTION
REASON
The coupling pedal easily is pressed or fails Low level of liquid in system of the hydraulic drive of coupling
Damage of the release bearing or fork of switching off of coupling
The diaphragm spring of a press clutch plate is damaged
Incomplete switching off of coupling (coupling conducts) Too high level of liquid in hydraulic system of coupling
Jamming of the conducted clutch plate on vents of a main shaft
Clutch plate buckling
The knot of a press disk is incorrectly built
The coupling switching off mechanism is worn-out or incorrectly built
Incomplete inclusion of coupling (coupling slips) Wear of overlays of a clutch plate below an admissible limit
Pollution of overlays of a clutch plate oil or lubricant
The disk is faulty press or the diaphragm spring weakened
Breakthroughs during the coupling work Wear of overlays of a clutch plate below an admissible limit
Pollution of overlays of a clutch plate oil or lubricant
The disk or diaphragm spring is deformed press
Fastenings of the transmission to the engine are weakened
The nave of a clutch plate or vent of an entrance shaft of the transmission is worn-out
Noise during the pressing or an otpuskaniye of a pedal of coupling The release bearing is worn-out
Are worn out or is absent lubricant on coupling pedal plugs
The knot of a press disk is faulty
Damage of a diaphragm spring of a press disk
Damage of the damping springs to a clutch plate