VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
- 4. Fuel system
   4.2. Fuel pump / fuel level sensor
   4.3. The fuel filter on models with petrol engines
   4.4. Adjustment of a cable of an accelerator (petrol engine)
   4.5. Additional adjustment (automatic transmission)
   + 4.6. Fuel system of the diesel engine
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






4.5. Additional adjustment (automatic transmission)

GENERAL INFORMATION

The place of connection of an ohmmeter for measurement of resistance of the Kick-down switch


PERFORMANCE ORDER
1. Disconnect the two-contact electric socket from the switch of the compulsory inclusion of a low gear (kick-down) located in a forward part of a motor compartment.
2. Connect an ohmmeter to contacts of the Kick-down switch and measure resistance which has to be equal to infinity, see rice. The place of connection of an ohmmeter for measurement of resistance of the Kick-down switch.
3. Slowly press an accelerator pedal. At approach of a pedal of an accelerator to an emphasis, resistance on contacts of the Kick-down switch has to decrease in steps to zero.
4. Otherwise make repeated adjustment of a cable of an accelerator or replace the faulty switch of compulsory inclusion of a low gear.