VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
- 4. Fuel system
   4.2. Fuel pump / fuel level sensor
   4.3. The fuel filter on models with petrol engines
   4.4. Adjustment of a cable of an accelerator (petrol engine)
   4.5. Additional adjustment (automatic transmission)
   + 4.6. Fuel system of the diesel engine
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






4.4. Adjustment of a cable of an accelerator (petrol engine)

GENERAL INFORMATION

Accelerator cable on models with engines 1,6-I and 1,8-I

1 – element of fastening of a cable of an accelerator. At removal to turn  on 90 ° counterclockwise;
2 – a sealing ring of a cable of an accelerator on a partition  of a motor compartment. Is established only on cars with  the mechanical transmission;
3 – clip. It is used only on cars with the mechanical transmission;
4 – clip. It is used only on cars with the automatic transmission;
5 – the switch of compulsory inclusion of a low gear on the automatic transmission (kick down);
6 – electric two-contact socket;
7 – accelerator cable;
8 – a pulley on an axis of a butterfly valve;
9 – bolt, 10 Nanometers;
10 – an arm for fastening of a cover of a cable of an accelerator;
11 – the fixing bracket for adjustment of a cable of an accelerator;
12 – accelerator pedal;
13 – accelerator pedal arm;
14 – accelerator pedal course limiter

Arrangement of the fixing bracket fixing an accelerator cable cover on four-cylinder engines


Arrangement of the fixing bracket fixing an accelerator cable cover on five-cylinder engines


Arrangement of the fixing bracket fixing an accelerator cable cover on six-cylinder engines


PERFORMANCE ORDER
1. Press an accelerator pedal against the stop and record it in this situation.
2. Check that the lever of a butterfly valve rested against the limiter of the maximum load. If it not so, adjust an accelerator cable.
3. Take the fixing bracket, the fixing accelerator cable cover to an arm, see rice. An arrangement of the fixing bracket fixing an accelerator cable cover on four-cylinder engines, rice. An arrangement of the fixing bracket fixing an accelerator cable cover on five-cylinder engines and rice. An arrangement of the fixing bracket fixing an accelerator cable cover on six-cylinder engines.
4. Move an accelerator cable cover on an arm until the lever of a butterfly valve does not concern the limiter of the maximum load. Enshrine a cover of a cable in this provision of a cable of an accelerator by the fixing bracket.
5. Release an accelerator pedal.