Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
- 2. Engines
2.2. General information
2.3. Lower mudguard of a motor compartment
+ 2.4. Four-cylinder petrol engine
+ 2.5. Diesel engine 1,9-I-TDI
+ 2.6. Drive of the gas-distributing mechanism
+ 2.7. Engine 2,8-I-V6
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment
|
Lower mudguard of a motor compartment (all engines)
1 – the self-cutting screw (3 pieces),
2 – forward part of a mudguard,
3 – the self-cutting screw (3 pieces),
4 – back part of a mudguard,
5 – the self-cutting screws (5 pieces),
6 – facing fastening,
7 – screw (2 pieces), |
8 – a bracket with a nut (2 pieces),
9 – a bracket with a nut (3 pieces),
10 – pin (4 pieces),
11 – casing,
12 – damper,
13 – arm |
Removal
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and fix on supports. |
| 2. Unscrew the self-cutting screws which fix the lower mudguard of the engine. |
| 3. Turn on 180 ° and take the fixing pins. |
| 4. Remove a lobby, and, in the presence, and back parts of a mudguard of the engine. |
|
Installation
| PERFORMANCE ORDER |
| 1. Establish a mudguard of the engine and fix it by the self-cutting screws, having tightened their moment 20 Nanometers. |
| 2. Insert the fixing pins and turn them on 180 °. |
| 3. Lower the car. |
|
|
|