VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
- 1. Maintenance
   1.1. Technical characteristics
   + 1.2. Frequency of service
   + 1.3. Engine oil
   1.4. Check of the exhaust system
   + 1.5. Engine cooling system
   + 1.6. Spark plugs
   1.7. Discharge of water from the fuel filter (diesel engines)
   1.8. Replacement of the fuel filter (diesel engines)
   1.9. Check of tightness of hoses and effluence of liquid
   1.10. Replacement of the filtering element of the air filter
   1.11. Check of a condition of a poliklinovy belt
   1.12. Maple belts
   1.13. Measurement of wear of gear belts on diesel engines
   1.14. Box of transfers / main transfer
   1.15. Check of a protective cover of a power shaft
   1.16. Visual check of tightness of the transmission
   1.17. Check of level of oil in the mechanical transmission
   1.18. Check of oil in the main transfer of automatic transmissions
   1.19. Check/replacement of level of oil in the automatic transmission
   1.20. Check of a forward suspension bracket and steering
   1.21. Check of dustproof covers of hinges of a forward suspension bracket
   1.22. Check of the shock-absorber
   1.23. Check of a radiator
   1.24. Check of electric chains
   + 1.25. Brake fluid
   1.26. Check of front brake shoes
   1.27. Check of back brake shoes
   1.28. Check of brake hoses
   1.29. Check of cables of the emergency brake
   1.30. Check of level of liquid in the amplifier of steering
   1.31. Dust filter
   1.32. Rechargeable battery
   1.33. Hinges of doors
   + 1.34. Windscreen washers
   1.35. Brushes of screen wipers
   1.36. Check of a starting position of the lever of a screen wiper
   1.37. Check of a tilt angle of the lever of a screen wiper
   1.38. Replacement of the battery in a key of remote control
   1.39. Zeroing of the Service-indicator
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






1.22. Check of the shock-absorber

PERFORMANCE ORDER
Check the shock-absorber for any signs of liquid leaks. If leak is found, therefore, the shock-absorber is damaged and demands replacement.
Prevention

Shock-absorbers need to be changed in pairs on one axis.



Efficiency of the shock-absorber is also checked by pressing a corner of a body and a sharp otpuskaniye. The body has to come back to a starting position after its otpuskaniye. If the body rises above a starting position and continues to be shaken, then probably the shock-absorber located from this party failed and is subject to replacement. Also check fastening of the shock-absorber for wear.