VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
- 1. Maintenance
   1.1. Technical characteristics
   + 1.2. Frequency of service
   + 1.3. Engine oil
   1.4. Check of the exhaust system
   + 1.5. Engine cooling system
   + 1.6. Spark plugs
   1.7. Discharge of water from the fuel filter (diesel engines)
   1.8. Replacement of the fuel filter (diesel engines)
   1.9. Check of tightness of hoses and effluence of liquid
   1.10. Replacement of the filtering element of the air filter
   1.11. Check of a condition of a poliklinovy belt
   1.12. Maple belts
   1.13. Measurement of wear of gear belts on diesel engines
   1.14. Box of transfers / main transfer
   1.15. Check of a protective cover of a power shaft
   1.16. Visual check of tightness of the transmission
   1.17. Check of level of oil in the mechanical transmission
   1.18. Check of oil in the main transfer of automatic transmissions
   1.19. Check/replacement of level of oil in the automatic transmission
   1.20. Check of a forward suspension bracket and steering
   1.21. Check of dustproof covers of hinges of a forward suspension bracket
   1.22. Check of the shock-absorber
   1.23. Check of a radiator
   1.24. Check of electric chains
   + 1.25. Brake fluid
   1.26. Check of front brake shoes
   1.27. Check of back brake shoes
   1.28. Check of brake hoses
   1.29. Check of cables of the emergency brake
   1.30. Check of level of liquid in the amplifier of steering
   1.31. Dust filter
   1.32. Rechargeable battery
   1.33. Hinges of doors
   + 1.34. Windscreen washers
   1.35. Brushes of screen wipers
   1.36. Check of a starting position of the lever of a screen wiper
   1.37. Check of a tilt angle of the lever of a screen wiper
   1.38. Replacement of the battery in a key of remote control
   1.39. Zeroing of the Service-indicator
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






1.17. Check of level of oil in the mechanical transmission

GENERAL INFORMATION

Oil in a mechanical box should not be changed.

For weakening of a carving stopper of a maslozalivny opening it is necessary to use a key with a face head of HAZET 2567-16 or VW 3357.

For a dolivka it is necessary to use G052 SAE 75W90 oil.
PERFORMANCE ORDER
1. Install the car on the elevator in horizontal position.
2. Remove the lower mudguard of the engine.
3. Using VW 3357 key, unscrew an oil-filling stopper from the transmission which is located before the left power shaft.
4. Check oil level. Oil level correct when it is on the lower edge of a carving opening.
5. If necessary add oil through an oil-filling opening.
6. Screw up a stopper of an oil-filling opening and tighten its moment 25 Nanometers.
Prevention

The case of the transmission can be made of aluminum or magnesian alloy. If the new carving stopper of an oil-filling opening is established, then it has to be picked up for number for the corresponding transmission as traffic jams have various covering. If to use an inappropriate stopper, then there can be a contact corrosion.