VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
- 1. Maintenance
   1.1. Technical characteristics
   + 1.2. Frequency of service
   + 1.3. Engine oil
   1.4. Check of the exhaust system
   + 1.5. Engine cooling system
   + 1.6. Spark plugs
   1.7. Discharge of water from the fuel filter (diesel engines)
   1.8. Replacement of the fuel filter (diesel engines)
   1.9. Check of tightness of hoses and effluence of liquid
   1.10. Replacement of the filtering element of the air filter
   1.11. Check of a condition of a poliklinovy belt
   1.12. Maple belts
   1.13. Measurement of wear of gear belts on diesel engines
   1.14. Box of transfers / main transfer
   1.15. Check of a protective cover of a power shaft
   1.16. Visual check of tightness of the transmission
   1.17. Check of level of oil in the mechanical transmission
   1.18. Check of oil in the main transfer of automatic transmissions
   1.19. Check/replacement of level of oil in the automatic transmission
   1.20. Check of a forward suspension bracket and steering
   1.21. Check of dustproof covers of hinges of a forward suspension bracket
   1.22. Check of the shock-absorber
   1.23. Check of a radiator
   1.24. Check of electric chains
   + 1.25. Brake fluid
   1.26. Check of front brake shoes
   1.27. Check of back brake shoes
   1.28. Check of brake hoses
   1.29. Check of cables of the emergency brake
   1.30. Check of level of liquid in the amplifier of steering
   1.31. Dust filter
   1.32. Rechargeable battery
   1.33. Hinges of doors
   + 1.34. Windscreen washers
   1.35. Brushes of screen wipers
   1.36. Check of a starting position of the lever of a screen wiper
   1.37. Check of a tilt angle of the lever of a screen wiper
   1.38. Replacement of the battery in a key of remote control
   1.39. Zeroing of the Service-indicator
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






1.15. Check of a protective cover of a power shaft

GENERAL INFORMATION

Check of a condition of a protective cover of a power shaft


PERFORMANCE ORDER
1. Lift and carefully fix the car on supports.
2. Turn a steering wheel to the right or to the left against the stop and you twist a wheel.
3. Examine rubber protective covers of hinges of equal angular speeds, squeezing them for disclosure of bends. Check them for existence of cracks which can lead to lubricant leak, and also to penetration in water and dirt.
Also check a condition of fixing collars, examine covers of internal hinges and casings on the other hand. If any damage is found, then the protective cover needs to be replaced immediately, see rice. Check of a condition of a protective cover of a power shaft.
At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any noticeable side play indicates wear of the hinge, wear in grooves of a shaft or unscrewing of a lock nut of a shaft.