Foltsvagen Passat B5
+ Maintenance instruction
- 1. Maintenance
1.1. Technical characteristics
+ 1.2. Frequency of service
+ 1.3. Engine oil
1.4. Check of the exhaust system
+ 1.5. Engine cooling system
+ 1.6. Spark plugs
1.7. Discharge of water from the fuel filter (diesel engines)
1.8. Replacement of the fuel filter (diesel engines)
1.9. Check of tightness of hoses and effluence of liquid
1.10. Replacement of the filtering element of the air filter
1.11. Check of a condition of a poliklinovy belt
1.12. Maple belts
1.13. Measurement of wear of gear belts on diesel engines
1.14. Box of transfers / main transfer
1.15. Check of a protective cover of a power shaft
1.16. Visual check of tightness of the transmission
1.17. Check of level of oil in the mechanical transmission
1.18. Check of oil in the main transfer of automatic transmissions
1.19. Check/replacement of level of oil in the automatic transmission
1.20. Check of a forward suspension bracket and steering
1.21. Check of dustproof covers of hinges of a forward suspension bracket
1.22. Check of the shock-absorber
1.23. Check of a radiator
1.24. Check of electric chains
+ 1.25. Brake fluid
1.26. Check of front brake shoes
1.27. Check of back brake shoes
1.28. Check of brake hoses
1.29. Check of cables of the emergency brake
1.30. Check of level of liquid in the amplifier of steering
1.31. Dust filter
1.32. Rechargeable battery
1.33. Hinges of doors
+ 1.34. Windscreen washers
1.35. Brushes of screen wipers
1.36. Check of a starting position of the lever of a screen wiper
1.37. Check of a tilt angle of the lever of a screen wiper
1.38. Replacement of the battery in a key of remote control
1.39. Zeroing of the Service-indicator
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment
|
Spark plugs
|
ENGINE
|
CANDLE TYPE
|
INTERELECTRODE
GAP, MM
|
|
1,6 I/74 kW (100 hp) of ADP
|
Bosch F7LTCR
|
1,0
|
|
1,6 I/74 kW (100 hp) of ADP
|
NGK BKUR 6 ET
|
0,8
|
|
1,6 I/74 kW (100 hp) of AHL
|
Bosch F7LTCR
|
1,0
|
|
1,8 I/92 kW (125 hp) of ADR
|
Bosch F7LTCR
|
1,0
|
|
1,8 I/92 kW (125 hp) of ADR
|
Beru 14FGH-7DTURX
|
1,0
|
|
1,8 I/92 kW (125 hp) of ADR
|
NGK BKUR 6 ET-10
|
1,0
|
|
2,3 I/110 kW (150 hp) of AGZ
|
NGK BKR 5 EKUP
|
0,7
|
|
2,8 I/142 kW (193 hp) of ACK
|
Bosch F7LTCR
|
1,0
|
|
2,8 I/142 kW (193 hp) of ACK
|
NGK BKUR 6 ET-10
|
1,0
|
| Oil for mechanical transmissions |
G052 SAE 75W90
|
| Oil volume: |
| – front-wheel cars |
2,25 l
|
| – all-wheel drive cars |
2,75 l
|
| Oil for automatic transmissions: |
| Type |
ATF ESSO EGL 71 141,
VW-ET G052 162
|
| Quantity |
3,5 l
|
| Oil for the main transfer of automatic transmissions: |
| Type |
SAE 75W90
|
| Volume |
0,75 l
|
Tightening moments
| Masloslivny stopper: |
| – 4-htsilindrovy engines with the stamped oil pallet |
30 Nanometer
|
| – 4-htsilindrovy engines with the cast oil pallet |
50 Nanometer
|
| – 5-titsilindrovy engines |
20 Nanometer
|
| – 6-titsilindrovy engines |
40 Nanometer
|
| Spark plugs: |
| – Bosch F7LTCR, NGK BKUR 6 ET, Beru 14FGH-7DTURX, NGK BKUR 6 ET-10 |
30 Nanometer
|
| – NGK BKR 5 EKUP |
25 Nanometer
|
| Stopper of an oil-filling opening in the automatic transmission: |
| – 01N |
25 Nanometer
|
| – 01V |
30 Nanometer
|
| Stopper of a carving opening in the automatic transmission for check of level of oil: |
| – 01N |
15 Nanometer
|
| – 01NV |
80 Nanometer
|
|
|