VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
- 13. Electric equipment
   13.2. General information
   + 13.3. Electric chains
   13.4. Safety locks
   13.5. Rules of care of the accumulator
   13.6. Check of the accumulator
   13.7. Accumulator charging
   13.8. Accumulator
   13.9. System of charging
   13:10. Generator
   13:11. Replacement of brushes of the generator and regulator of tension
   13:12. System of start of the engine
   13:13. Starter
   13:14. Traction relay of a starter
   13:15. Replacement of bulbs of external lighting
   13:16. Replacement of bulbs of internal lighting
   13:17. Devices of external lighting
   13:18. Executive engine of the proofreader of light of headlights
   13:19. Adjustment of light of headlights
   13:20. Gas-discharge lamps of headlights of passing beam
   13:21. Combination of devices
   13:22. Multipurpose switches of a steering column
   13:23. Switches
   13:24. Radio receiver
   13:25. High-frequency loudspeakers
   13:26. Low-frequency loudspeakers
   13:27. Antenna
   13:28. Check of a heater of back glass
   13:29. Windshield screen wiper engine
   13:30. Engine of a screen wiper of back glass
   13:31. Windscreen washer pump
   13:32. System of the central blocking of locks
   13:33. Main malfunctions of the generator
   13:34. Main malfunctions of a starter
   + 13:35. Electric circuits






13:30. Engine of a screen wiper of back glass

GENERAL INFORMATION

Screen wiper of back glass

1 – folding casing,
2 – nut, 15 Nanometers,
3 – screen wiper lever,
4 – sealing plug,
5 – washer nozzles,
6 – sealing ring,
7 – screen wiper engine,
8 – nut, 8 Nanometers,
9 – the damping ring,
10 – expansion plug,
11 – screen wiper brush

Removal

PERFORMANCE ORDER
1. Remove the lever of a screen wiper of back glass.
2. Remove an internal upholstery of a back door.
3. Disconnect from the screen wiper engine the electric socket and a hose of supply of liquid to a washer.
4. Unscrew nuts of fastening of the engine of a screen wiper and remove it.
5. Remove expansion plugs and the damping rings from the screen wiper engine and check their state.

Installation

PERFORMANCE ORDER
1. Install the sealing plug in an opening of back glass. Being careful, install the screen wiper engine into place and fix it by nuts.
2. Further installation is made in the sequence, the return to removal.
3. Tighten a nut of fastening of the lever of a screen wiper the moment of 15 Nanometers.