Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
- 13. Electric equipment
13.2. General information
- 13.3. Electric chains
13.3.1. Detection of not closed chain
13.4. Safety locks
13.5. Rules of care of the accumulator
13.6. Check of the accumulator
13.7. Accumulator charging
13.8. Accumulator
13.9. System of charging
13:10. Generator
13:11. Replacement of brushes of the generator and regulator of tension
13:12. System of start of the engine
13:13. Starter
13:14. Traction relay of a starter
13:15. Replacement of bulbs of external lighting
13:16. Replacement of bulbs of internal lighting
13:17. Devices of external lighting
13:18. Executive engine of the proofreader of light of headlights
13:19. Adjustment of light of headlights
13:20. Gas-discharge lamps of headlights of passing beam
13:21. Combination of devices
13:22. Multipurpose switches of a steering column
13:23. Switches
13:24. Radio receiver
13:25. High-frequency loudspeakers
13:26. Low-frequency loudspeakers
13:27. Antenna
13:28. Check of a heater of back glass
13:29. Windshield screen wiper engine
13:30. Engine of a screen wiper of back glass
13:31. Windscreen washer pump
13:32. System of the central blocking of locks
13:33. Main malfunctions of the generator
13:34. Main malfunctions of a starter
+ 13:35. Electric circuits
|
For protection of electric chains safety locks of knife type which color corresponds to current of protection of a safety lock are used. Serviceability of a safety lock is determined by presence of the wire conductor connecting contacts of a safety lock. For replacement of the failed safety lock previously switch off the corresponding electric chain, take a safety lock from a nest tweezers. If again established safety lock instantly fails when giving tension, check protected электричес I forge a chain. If the safety lock protects several chains, then they need to be connected in turn in order that to determine a faulty chain by burn-out of a safety lock. |
|