VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
- 13. Electric equipment
   13.2. General information
   + 13.3. Electric chains
   13.4. Safety locks
   13.5. Rules of care of the accumulator
   13.6. Check of the accumulator
   13.7. Accumulator charging
   13.8. Accumulator
   13.9. System of charging
   13:10. Generator
   13:11. Replacement of brushes of the generator and regulator of tension
   13:12. System of start of the engine
   13:13. Starter
   13:14. Traction relay of a starter
   13:15. Replacement of bulbs of external lighting
   13:16. Replacement of bulbs of internal lighting
   13:17. Devices of external lighting
   13:18. Executive engine of the proofreader of light of headlights
   13:19. Adjustment of light of headlights
   13:20. Gas-discharge lamps of headlights of passing beam
   13:21. Combination of devices
   13:22. Multipurpose switches of a steering column
   13:23. Switches
   13:24. Radio receiver
   13:25. High-frequency loudspeakers
   13:26. Low-frequency loudspeakers
   13:27. Antenna
   13:28. Check of a heater of back glass
   13:29. Windshield screen wiper engine
   13:30. Engine of a screen wiper of back glass
   13:31. Windscreen washer pump
   13:32. System of the central blocking of locks
   13:33. Main malfunctions of the generator
   13:34. Main malfunctions of a starter
   + 13:35. Electric circuits






13:26. Low-frequency loudspeakers

GENERAL INFORMATION

Arrangement of rivets of fastening of a low-frequency loudspeaker to a door


Removal

PERFORMANCE ORDER
1. Remove an internal upholstery of a door.
2. Disconnect the electric socket from a loudspeaker.
3. Using a drill of the corresponding diameter, drill 4 rivets fixing a loudspeaker to a door see rice. An arrangement of rivets of fastening of a low-frequency loudspeaker to a door.
4. Remove a loudspeaker and take the remains of rivets from openings at doors.

Installation

PERFORMANCE ORDER
1. Establish a low-frequency loudspeaker on a door and fix it by rivets or the self-cutting screws.
2. Connect the electric socket to a loudspeaker.
3. Establish an internal upholstery of a door, at the same time do not forget to establish a sealant between a loudspeaker and an upholstery of a door.