VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
- 12. Heating, ventilation
   12.2. Ventilating nozzles
   12.3. Control panel of a heater
   12.4. Lever of the central gate
   12.5. Control unit of a heater
   12.6. Block of resistors of a heater
   12.7. Control unit of a heater and conditioner
   12.8. Conditioner compressor
   12.9. Heater fan
+ 13. Electric equipment






12.7. Control unit of a heater and conditioner

Removal

PERFORMANCE ORDER
1. Remove the decorative panel of the control unit of a heater and the conditioner. For this purpose, using the screw-driver with are thin an edge, wring out clamps, it is located panels, ny on corners.
2. Unscrew 4 screws, the fixing control units of a heater and the conditioner.
3. Disconnect electric sockets from the control unit.

Installation

PERFORMANCE ORDER
1. Before installation check smoothness of the course of cables of management and, if necessary, replace them.
2. For simplification of identification of a cover of cables of management have different color.
3. Dress the rounded-off ends of cables (1) on levers (2) managements of a heater and the conditioner, and fix covers of cables on the control unit case.
4. Connect the electric socket to the control unit.
5. Insert the control unit together with the connected cables into the dashboard.
6. Establish and screw two screws the heater panel.
7. Screw in four screws, the fixing control units of a heater and the conditioner.
8. Insert the decorative panel of the control unit before its accurate fixing.