VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
- 12. Heating, ventilation
   12.2. Ventilating nozzles
   12.3. Control panel of a heater
   12.4. Lever of the central gate
   12.5. Control unit of a heater
   12.6. Block of resistors of a heater
   12.7. Control unit of a heater and conditioner
   12.8. Conditioner compressor
   12.9. Heater fan
+ 13. Electric equipment






12.6. Block of resistors of a heater

Removal

PERFORMANCE ORDER
1. Remove the lower finishing of the dashboard from the passenger.
2. Disconnect the electric socket from the block of resistors.
3. Unscrew the block of resistors and remove it from a heater.

Installation

PERFORMANCE ORDER
1. Apply special VW-AMV 17600005 sealant on the interfaced surfaces of the block of resistors and the block of a heater.
2. Install the block of resistors on the block of a heater and screw it.
3. Connect the multicontact electric socket to the block of resistors.
4. Establish the lower finishing of the dashboard from the passenger.