VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.2. General information
   10.3. ABS/EBV/EDS/ASR/ESP systems
   10.4. Check of the vacuum amplifier of brakes
   + 10.5. Replacement of front brake shoes
   10.6. Replacement of back brake shoes
   10.7. Check of a brake disk
   10.8. Brake disk
   10.9. Pumping of the hydraulic brake system
   + 10:10. Brake pipelines and hoses
   10:11. Stoplight switch
   10:12. Lever of the emergency brake
   10:13. Adjustment of the emergency brake
   - 10:14. Cable of the emergency brake
      10.14.2. All-wheel drive cars
   10:15. Main malfunctions of brakes
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






10.14.2. All-wheel drive cars

GENERAL INFORMATION

Arrangement of the muffler which needs to be removed before removal of cables of the emergency brake on all-wheel drive models


Arrangement of nuts of fastening of the thermofilter on all-wheel drive models


Removal

Prevention

Operations on removal of cables of the emergency brake on all-wheel drive models are similar to operations on removal of cables of the emergency brake on front-wheel models. In the real subsection differences on removal of cables of the emergency brake are given in all-wheel drive models.


PERFORMANCE ORDER
1. Remove the exhaust system, see rice. An arrangement of the muffler which needs to be removed before removal of cables of the emergency brake on all-wheel drive models.
2. Unscrew nuts and remove the thermofilter, see rice. An arrangement of nuts of fastening of the thermofilter on all-wheel drive models).
3. Weaken a tension of a cable of the emergency brake and remove it from a support of back brakes.
4. Using passatizh, move regulators of cables of the emergency brake.
5. Unscrew bolts and release a cable of the emergency brake from holders on a back beam.
6. Release a cable of the emergency brake from all fastenings on the car bottom.