VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
+ Maintenance instruction
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.2. General information
   10.3. ABS/EBV/EDS/ASR/ESP systems
   10.4. Check of the vacuum amplifier of brakes
   + 10.5. Replacement of front brake shoes
   10.6. Replacement of back brake shoes
   10.7. Check of a brake disk
   10.8. Brake disk
   10.9. Pumping of the hydraulic brake system
   + 10:10. Brake pipelines and hoses
   10:11. Stoplight switch
   10:12. Lever of the emergency brake
   10:13. Adjustment of the emergency brake
   - 10:14. Cable of the emergency brake
      10.14.2. All-wheel drive cars
   10:15. Main malfunctions of brakes
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






10:14. Cable of the emergency brake

10.14.1. Front-wheel cars

GENERAL INFORMATION

Arrangement of the thermofilter of the exhaust system

1 – forward section of the thermofilter,
2 – main section of the thermofilter.

Shooters show an arrangement of nuts of fastening of the main section of the thermofilter.


Adjusting coupling of a cable of the emergency brake

And – the direction of rotation регулировоч ache couplings,
In – the direction of movement of covers of a cable of the emergency brake,
With – the adjusting coupling,
D – clamp,
Е – flange of the adjusting coupling

Removal

PERFORMANCE ORDER
1. Weaken bolts of fastening of back wheels, then lift a back part of the car and fix on supports. Remove back wheels.
2. Remove forward section of the thermofilter.
3. Unscrew nuts and move the main section of the thermofilter, see rice forward. Arrangement of the thermofilter of the exhaust system.
4. Weaken a tension of cables of the emergency brake.
5. Remove a clamp (D), see rice. Adjusting coupling of a cable of the emergency brake.
6. A key on 13 mm hold a regulator flange from a provorachivaniye and unscrew the adjusting coupling against the stop.
7. Move apart covers of cables of the emergency brake.
8. Take a bracket, the fixing cover of a cable of the emergency brake to a support of a back brake.
9. Disconnect a cable of the emergency brake from the lever of the emergency brake on a support. At the same time be careful not to damage a protective cover of the emergency brake.
10. Release a cable of the emergency brake from clamps on a beam of a back suspension bracket.
11. Take a wheel RPM meter wire from fastening brackets.
12. Unscrew the nuts fixing the thermofilter to sound insulation and move the thermofilter aside.
13. Using a screw-driver edge, remove the fixing brackets and release a cable of the emergency brake.
14. Using the screw-driver, remove from the console of a cable of the emergency brake.
15. Remove decorative finishing of a back part of the central console.
16. The screw-driver through an opening in the basis of the lever of the emergency brake press a cable of the emergency brake down and disconnect it from the lever of the emergency brake.
17. Take a cable of the emergency brake.

Installation

PERFORMANCE ORDER
1. Before installation of cables of the emergency brake replace plastic details on the compensator of cables of the emergency brake.
2. Using a screw-driver edge, through an opening in the basis of the lever of the emergency brake, fix the compensator of cables of the emergency brake from a provorachivaniye.
3. Via the console fix a spherical head in the compensator of cables of the emergency brake.
4. Fix a cable of the emergency brake on the console.
5. Fix a cable of the emergency brake on supports of a back brake and record them brackets.
6. Fix a cable of the emergency brake on a back beam.
7. Establish decorative finishing of a back part of the central console.
8. Establish into place and screw the thermofilter on heat insulation.
9. Fix by brackets a wire of the sensor of rotation of a wheel.
10. Screw the thermofilter.
11. Establish back wheels, then lower the car on the earth. Tighten bolts of fastening of wheels in the diagonal sequence the moment of 120 Nanometers.