VW Passat B5

since 1996 release

Repair and operation of the car



Foltsvagen Passat B5
- Maintenance instruction
   Keys
   Doors, central blocking of locks
   Trunk lid (back door of the Station wagon car)
   Remote radio control by locks
   Electrowindow regulators
   Rear-view mirrors
   Seat belts
   System of inflatable safety cushions
   Head restraints
   + Front seats
   Memory for a driver's seat
   Storing of adjustments of a seat and external mirrors for advance
   Call of adjustments of a seat and external mirrors for the movement by the forward course
   Back many-placed seat (Sedan)
   Back many-placed seat (Station wagon)
   Cover for lengthy baggage
   Armrests
   Luggage compartment
   Shelf of the luggage compartment (station wagon)
   Parking brake
   Mechanical transmission
   + 4-staged automatic transmission
   + 5-staged sekventalny automatic transmission
   Adjustable steering column
   Ignition lock
   Launch of the engine
   Engine stop
   Control devices
   Control lamps
   System of automatic control with the multipurpose index
   Violations of paramount importance (red pictograms)
   Violations of minor importance (yellow pictograms)
   Navigation system
   Switches and switches
   Understeering switch of indexes of turns and light of headlights
   Cruise control
   Screen wipers and windscreen washers
   Heating and ventilation
   Air supply nozzles
   Climatic installation
   Air supply nozzles
   + Climatic Klimatronik installation
   Lifting and movable panel of the hatch of a roof
   Internal lighting
   Box for things
   Plug sockets in the luggage compartment
   How economically to drive the car
   Braking
   Anti-blocking system of brakes
   Protivobuksovochny system (the reduced torque of the engine, ASR)
   Protivobuksovochny system with snubbing of a wheel (EDS)
   Electronic system of stabilization (ESP)
   Amplifier of steering
   Fuel (petrol engines)
   Fuel (diesel engines)
   + Motor compartment
   Bases of safe operation of the car
   Specifications
   Bases of safe operation of the car
   Specifications
+ 1. Maintenance
+ 2. Engines
+ 3. Cooling system
+ 4. Fuel system
+ 5. Engine management
+ 6. Exhaust system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Heating, ventilation
+ 13. Electric equipment






Air supply nozzles

GENERAL INFORMATION


Through all nozzles air moves in the salon which is warmed up or is not warmed up (depending on position of the handle A).

Distribution of air supply is determined by nozzles by position of the handle C.

In addition nozzles 3 and 4 can be separately open or closed.

The nozzle is closed: the side disk regulator on.

The nozzle is opened: the side disk regulator on.

Depending on position of the disk regulator the air stream changes the direction on height.

If to turn the disk regulator under a deflector lattice, the direction of an air stream in the horizontal plane changes.

By means of snuffled 2 remains not misted over the lower part of a windshield.

How to clear of ice wind and side glasses

To install the switch B on a step 3.

To turn the handle A clockwise against the stop.

The handle C on.

4 to establish nozzles so that the stream of air was directed to side glasses.

How to prevent fogging wind and side glasses

If at high humidity of air, for example, during a rain, windows mist over, it is recommended to make the following:

To put the switch B on a step 2 or 3.

The handle A if it is necessary to transfer to an air heating zone.

To put the handle C on.

Through nozzles 4 it is possible to direct in addition warm air to side glasses.

Ventilation (supply of fresh air in salon)

At the provision of governing bodies below from snuffled 3 and 4 not warmed up fresh air moves:

To put the switch B on a desirable step.

To turn the handle A counterclockwise against the stop.

The handle C on.

When fogging a windshield to put the handle C on.

At will the handle C can be put in other position also.

3 and 4 to open nozzles.

How quickly to increase temperature in salon

To put the switch B on a step 3.

To turn the handle A clockwise against the stop.

To put the handle C on.

When fogging a windshield to put the handle C on.

4 to establish nozzles at will.

How to support pleasant heat in salon

After windows were cleared of fogging and temperature in salon reached desirable level, it is recommended to make the following:

To put the switch B on a desirable step.

To install the handle A on desirable heating.

To install the handle C in a zone between "An air stream in a zone of legs" and "Cleaning of ice wind and side glasses".

When fogging a windshield to install the handle C on.

4 to establish nozzles at will.

General instructions

In order that heating and ventilation of salon worked reliably, the opening for an intake of fresh air located before a windshield is necessary to hold pure from ice, snow and leaves.

In any intermediate position it is possible to install only handles A and C.

To avoid fogging of glasses, it is necessary to include the switch B at a small speed of the movement of the car constantly the lowest step of an operating mode of the fan, and With to put in a position.

Heating ability of system of heating depends on temperature of cooling liquid of the cooling system of the engine – therefore the biggest heating happens at the engine which is warmed up up to the working temperature.

The used air is removed through exhaust outlets in a back part of a body; it is not necessary to block places of an exit of the used air.

On the car the sedan it is impossible to block something a crack between the luggage shelf and back glass which serves for removal of the used air.